Proflush Magmaster System

The Powerflushing operation can be speeded up by utilising a Magmaster Magnetic Filtration unit integrally located in the Proflush machine.

The quick, clean and efficient way to remove magnetite and all particulates from the circulating system water during the Powerflushing operation. This acts as a single pass filter that will filter out all the loosened debris circulating around the system during the cleaning process resulting in a reduction of around an hour off the average house cleaning time. The magnetic filtration unit collects all debris so that the householder can see what has been taken out of the system and reduces the chance of any debris re-entering the boiler which may cause early failure.

To protect the system from future ingress of corrosion particles, an inline Magmaster System Filter should be installed, details of this product are listed below and can be obtained directly from Norstrom Group Ltd.

Proflush Magmaster Powerflushing System when purchased as a complete unit.

The only machine in the UK with a 3 year warranty and built in magnetic filtration.

The Package is supplied complete with the following items as standard:

2 number 3mtr x 3/4" Blue High Temp-High Pressure Flow and Return Hoses with female camlocks at each end.

1 number 15mtr x 3/4" clear PVC Braided Dump Hose with double dump female camlocks.

1 number 15mtr x 1/2" clear PVC Braided Cold Water fill hose.

2 number 1 1/2" bsp Brass Pump Union Adaptors with Male Camlocks.

2 number 15mm Brass Compression fitting with Male Camlocks.

2 number Prochem 1ltr Sample Starter Chemical Pack.

Written 3 year extended warranty, operating instructions and FAQ sheet.

-------------------------------------------------------------------------------------------------------------------------

Magmaster Stand Alone

Can be used with the Proflush Thermal machine and can be supplied for use with any other Powerflushing machine. Cuts water usage in half, speeds up the flushing process, traps all unwanted debris before it reaches the heat exchanger and customers can see exactly what you are taking out of the system.

-------------------------------------------------------------------------------------------------------------------------------------------------

"NEW" Magmaster System Filter with 3/4" BSP male thread connections making it easy to fit with suitable couplings to 22mm or 28mm copper pipe.

Developed to protect the boiler and heating system from harmful Iron Oxide particles and sludge build up.

12000 gauss of magnetic power, complete with isolation valves, and screw top tool.

Overall size 124mm wide x 253mm High, externally removable magnet, preventing direct contact with hands. Drain outlet, to facilitate removal of Iron Oxides.

Incorporating Flow manager, which forces water to flow over the fins, thus maximising iron oxide retention over increased surface area.

Transparent housing, allows visible inspection of Iron Oxide retention.

NEW VERSION WITH EASY OPTION OF FITTING INTO HORIZONTAL OR VERTICAL PIPE RUN.

Just £85.00 + vat each direct from Norstrom Group.